Skip to content
Quality inspector writing a cost report beside machined parts in a factory

SARK Group / Plastic injection molding cost in India

Plastic Injection Molding Cost in India: What You’ll Actually Pay in 2026

Plastic injection molding cost in India has two parts: a one-time mould (tooling) cost, typically ₹40,000 to ₹60 lakh+ depending on size, cavities and steel, and a per-part price, usually ₹2 to ₹80 for most engineering components. The per-part price falls sharply as volume rises, because the mould cost is spread across more pieces.

Updated 23 October 2026 · Written by the SARK Group tool room and production team, Chandigarh & Baddi

1988Moulding since
75+CNC moulding machines
100–600 TClamping force range
3Plants in Chandigarh and Baddi
1,10,000+Sq ft of shop floor

We get this question on almost every RFQ call. A buyer has a drawing, a target price from a sourcing team, and no idea whether a quote of ₹3.5 lakh for the tool is cheap or a rip-off. This guide breaks the number down the same way our estimators do at SARK Group, where we have been quoting and running moulds since 1988 across 75+ CNC-controlled machines.

Row of CNC injection molding machines with hopper dryers at SARK Industries plant in Chandigarh
Machine hall at our Chandigarh plant, where machine tonnage directly sets the hourly rate in every quote.

How Much Does Plastic Injection Molding Cost in India?

Here is the short version, split into the two numbers you’ll see on any quotation.

Cost elementPaid whenTypical range in India (2026)What drives it
Mould / toolingOnce, before production₹40,000 – ₹60 lakh+Part size, cavities, steel grade, hot vs cold runner, slides and lifters
Per-part (piece) priceEvery order₹2 – ₹80 for most engineering partsResin price, part weight, cycle time, machine tonnage, secondary operations
Samples / trials (T0, T1)During mould approvalOften included in toolingNumber of correction loops
Secondary operationsPer part₹0.20 – ₹15Printing, ultrasonic welding, inserts, assembly, testing

These are indicative market ranges, not a quotation. Your actual number depends on the drawing.

Plastic Injection Mould Cost: Price Ranges by Tool Type

The mould is the big cheque. Buyers who only compare the bottom-line tooling figure usually end up comparing two very different tools.

Tool typeTypical useExpected life (shots)Indicative cost (INR)
Prototype / soft tool (aluminium or pre-hardened steel, 1 cavity)Pilot runs, market testing5,000 – 50,000₹40,000 – ₹2 lakh
Production tool, single cavity, P20 steelMedium-volume housings, covers3 – 5 lakh₹1.5 – ₹5 lakh
Multi-cavity (4 – 16), hardened steelCaps, clips, connectors, switch parts10 lakh+₹5 – ₹15 lakh
Hot-runner or large tool (appliance, automotive)Big panels, high-volume parts10 lakh+₹15 – ₹60 lakh+

A cheap tool isn’t automatically a bad deal. If you need 8,000 parts a year, paying for a 16-cavity hardened mould is wasted money. We’ve talked more than one start-up out of a tool they didn’t need.

For the steel grades and build steps behind these numbers, see our guide to the plastic mold manufacturing process.

Automated manufacturing machine with steel shafts and a computer control panel

How to Calculate the Per-Part Cost

Every moulder in India uses some version of this formula. Once you know it, you can sanity-check any quote in five minutes.

  1. Material cost = part weight (incl. runner share) × resin price per kg × (1 + scrap %).
  2. Machine cost = machine-hour rate ÷ parts produced per hour. Parts per hour = (3,600 ÷ cycle time in seconds) × number of cavities.
  3. Mould amortisation (optional) = mould cost ÷ total parts over the tool’s life or contract.
  4. Secondary operations = printing, assembly, inserts, testing per piece.
  5. Packing, overheads and margin, usually 10 – 20% on top.

Worked example: a 25 g ABS switch housing

Assumptions (illustrative, not a quote): ABS at ₹200/kg, 3% scrap, a 4-cavity mould on a 150-ton machine at ₹650/hour, 30-second cycle, and a ₹4.5 lakh tool spread over 2 lakh parts.

  • Material: 0.025 × 200 × 1.03 = ₹5.15
  • Machine: 650 ÷ (120 shots × 4) = ₹1.35
  • Mould amortisation: 4,50,000 ÷ 2,00,000 = ₹2.25
  • Packing and margin at 15%: ≈ ₹1.31
  • Total: ≈ ₹10.06 per part

Notice what dominates. Resin is half the price. That’s why shaving 2 g off a wall section often saves more than haggling over the machine rate.

7 Factors That Change Your Quote the Most

  1. Annual volume. It decides the cavity count, the steel, and whether a hot runner pays back.
  2. Part size and machine tonnage. A part that needs a 400-ton press costs far more per hour than one that runs on 100 tons. Our plants run machines from 100 to 600 tons, and we match the part to the smallest press that holds it.
  3. Material. PP and HIPS are cheap; PC, PA66-GF and PBT cost more and often need drying.
  4. Tolerances. Asking for ±0.02 mm everywhere when ±0.1 mm would do adds tool-making hours and inspection time.
  5. Undercuts and side actions. Each slide or lifter adds cost to the mould and seconds to the cycle.
  6. Surface finish and texture. Mirror polish and texturing are priced separately.
  7. Secondary work. In-house pad, screen and laser printing plus assembly avoids a second vendor’s margin and freight.

When Is Injection Molding Cheaper Than 3D Printing or CNC?

As a rough rule from our RFQs: below a few hundred parts, 3D printing or CNC usually wins. Between about 500 and 5,000 parts, a soft tool often makes sense. Above 5,000 parts a year, plastic injection molding is almost always the cheapest per piece.

QuantityUsually cheapestWhy
1 – 3003D printing / CNCNo tooling cost
300 – 5,000Soft tool injection moldingLow tool cost, real production material
5,000+Production injection moldingLowest per-part price, repeatable quality

Want the trade-offs beyond cost? Read our breakdown of plastic injection molding advantages and disadvantages.

How to Reduce Plastic Injection Molding Costs

  • Ask for a DFM (design for manufacturing) review before the tool is cut. Uniform walls and proper draft angles cut cycle time and rejections.
  • Order a family mould for small parts that ship together.
  • Start with fewer cavities and add a second tool when volume is proven.
  • Check whether a cheaper grade meets the spec (for example, PP copolymer instead of ABS for non-cosmetic parts).
  • Bundle printing and assembly with the moulder so parts arrive ready to fit.
  • Agree a scheduled annual volume so the moulder can plan resin buying.

Why Plant Location Affects Your Price

Our three plants sit in Chandigarh and Baddi, Himachal Pradesh, part of north India’s main electrical and appliance manufacturing belt. Being close to OEM assembly lines shortens freight and lets us run smaller, more frequent dispatches. All three units carry 100% power back-up, which matters more than most buyers think: a mid-shift power cut scraps a full cavity set and drags out lead times. See the equipment list on our facilities page.

Frequently Asked Questions

How much does a plastic injection mould cost in India?

A simple single-cavity mould usually costs ₹40,000 to ₹5 lakh. Multi-cavity hardened tools run ₹5 to ₹15 lakh, and large hot-runner moulds for appliances or automotive parts can cross ₹60 lakh. The final price depends on part size, cavities, steel grade and side actions.

What is the minimum order quantity for injection molding?

There is no fixed rule, but injection molding becomes cost-effective at roughly 1,000 to 5,000 parts. Below that, the mould cost per piece is high, so 3D printing, CNC or a low-cost soft tool is usually better.

Who owns the mould after I pay for it?

In most Indian contracts the customer who pays for the tool owns it, while the moulder stores and maintains it. Always put ownership, maintenance responsibility and transfer terms in writing before the tool is made.

How long does it take to make an injection mould?

Prototype tools take about 2 to 4 weeks. Production moulds typically take 4 to 8 weeks, and complex multi-cavity or hot-runner tools can take 10 to 14 weeks, including trials and corrections.

Why do injection molding quotes differ so much between suppliers?

Quotes often assume different steel grades, cavity counts, machine sizes and tool life. Ask every supplier to state these clearly, along with cycle time and resin price, so you are comparing the same tool and process.

Is plastic injection molding cheaper in India than in China?

Tooling in China can be cheaper for some parts, but freight, duties, time-zone delays and travel for mould approvals often close the gap. Many OEMs now keep tools in India for faster changes and shorter supply chains.

Get a Line-by-Line Quote

Send us your drawing (STEP or IGES), material, annual volume and any printing or assembly needs. Our tool room will return a quote that lists steel grade, cavities, cycle time and per-part price separately, so you can compare it fairly.

Request a quoteCall +91 89682 65400info@sark.in

Plants: Industrial Area Phase I, Chandigarh; EPIP Jharmajri, Baddi; Bhatolikalan, Baddi (H.P.). Open Monday to Saturday.

Related reading: what is plastic injection molding · how to choose an injection molding company · OEM plastic product manufacturing · plastic injection moulding companies in Pune