Skip to content
Automated manufacturing machine with a computer control panel used in OEM plastic product manufacturing

SARK Group / OEM plastic product manufacturing

Plastic Product Manufacturing for OEMs: From Your Drawing to a Packed, Tested Assembly

OEM plastic product manufacturing is a contract service where a manufacturer turns a brand’s design into finished plastic parts or assemblies. It covers design review, mould making, injection molding, printing, assembly, testing and packing under one roof, so the OEM receives parts ready to fit on its own production line.

Updated 23 October 2026 · SARK Group, injection moulding since 1988

1988Moulding since
75+CNC moulding machines
100–600 TClamping force range
3Plants in Chandigarh and Baddi
1,10,000+Sq ft of shop floor

Most of the plastic you touch every day was made by a company whose name isn’t on it. The switch plate in your office, the housing of a ceiling fan regulator, the clip inside a car door. Brand owners design these parts; contract moulders like us at SARK Group make them. This page explains exactly how that hand-off works, stage by stage, so you know what to expect before you send an RFQ.

CNC controlled plastic injection moulding machine with hopper loader used for OEM plastic product manufacturing
A production cell: hopper loader, dryer and CNC-controlled moulding machine running an OEM part.

What Does an OEM Plastic Product Manufacturer Do?

An integrated manufacturer handles every step between “here’s our CAD file” and “the boxes are on your dock.” At SARK that means:

  • Design for manufacturing (DFM) review of your part
  • Mould design and mould making in our in-house tool room
  • Injection molding on 75+ CNC-controlled machines from 100 to 600 tons
  • Pad, screen and laser printing of logos, markings and ratings
  • Automated and manual assembly lines
  • Electrical testing in our in-house lab for appliance assemblies
  • Inspection, packing to your specification and dispatch

The point of keeping it in one place is accountability. When a part fails fitment, there’s one team to call, and nobody blames the printing vendor or the tool maker.

The 8-Stage OEM Manufacturing Process

1. RFQ and NDA

You share the 3D model (STEP/IGES), 2D drawing with tolerances, material spec, annual volume and finish requirements. We sign an NDA first if the product is unreleased.

2. DFM review

Our tool room flags thick sections, missing draft, sharp corners and undercuts that would cause sink marks, warpage or a slow cycle. Small fixes here save the most money later. A 0.5° draft change can remove a slide from the mould entirely.

3. Mould design and build

We design the gate, runner, cooling and ejection layout, then machine the tool. The full build sequence is covered in our plastic mold manufacturing process guide.

4. Trials and sample approval (T0, T1)

First shots are measured against the drawing. We send dimensional reports and physical samples. Corrections go back to the tool room until you sign off.

5. Pilot run

A short batch confirms the cycle time, process window and packaging before full volume.

6. Mass production

Process parameters are locked, and dryers, vacuum loaders and volumetric dosers keep material and colour consistent shift after shift.

7. Secondary operations and assembly

Printing, insert fitting, ultrasonic work and sub-assembly happen on the same site, so parts aren’t trucked between vendors.

8. Testing, packing and dispatch

Electrical assemblies are tested in our lab. Everything is packed to your line-feeding format and dispatched from Chandigarh or Baddi.

Engineer with a tablet checking a machine control panel on the factory floor

Materials We Process and What They’re Used For

MaterialKey propertyTypical OEM parts
PP (polypropylene)Low cost, chemical resistantCaps, containers, appliance internals
ABSGood finish, rigidHousings, covers, switch plates
PC (polycarbonate)Impact strength, clarityLight diffusers, transparent covers
PC-ABS blendToughness plus finishElectronics and charger housings
PA6 / PA66 (nylon), glass-filledStrength, heat resistanceAutomotive clips, brackets, gears
POM (acetal)Low friction, dimensional stabilityGears, bushes, moving parts
PBTElectrical insulation, heat resistanceConnectors, terminal blocks
HIPSEasy to mould, low costLiners, trays, non-structural parts

Industries We Manufacture For

Since 1988 our work has centred on six sectors: electrical, electronics, home appliances, automotive, FMCG and medical. Electrical and appliance parts make up a large share, which is why we built an electrical testing lab rather than outsourcing it. For a deeper look at why these sectors rely on moulded plastic, read why injection molding is used in automotive, medical and consumer products.

Our Manufacturing Capacity

PlantLocationMachinesTonnage rangeHighlights
SARK IndustriesIndustrial Area Phase I, Chandigarh25+100 – 600 TTool room, product design, mould making, printing
HIMSAR TechnomersBhatolikalan, Baddi (H.P.)18+100 – 300 T (max 350 T)Assembly lines, electrical testing lab, Philips EICC Green Supplier
SARK GENEXEPIP Jharmajri, Baddi (H.P.)32+100 – 400 TSpace to install machines up to 2,000 T

Combined manufacturing area exceeds 1,10,000 sq ft, with quality systems run to ISO 9001:2015. Full details on our facilities page.

Injection moulding machines with auxiliary vacuum loaders and material drums at HIMSAR Technomers plant in Baddi Himachal Pradesh
Moulding line at HIMSAR Technomers, Baddi.

What to Send for an Accurate Quote

  1. 3D CAD file (STEP, IGES or Parasolid)
  2. 2D drawing with critical dimensions and tolerances
  3. Material grade and colour (or the performance you need)
  4. Annual volume and batch size
  5. Printing, assembly, testing and packing needs
  6. Target timeline for samples and first production

If you only have a sample part or a sketch, send that. Our product design team can build the model. Want to understand the money side first? See our plastic injection molding cost guide.

Frequently Asked Questions

What is plastic product manufacturing?

Plastic product manufacturing is the process of turning plastic resin into finished parts using methods such as injection molding, extrusion or blow molding. For engineering components, injection molding is the most common method because it produces identical, precise parts at high volume.

Can you manufacture from just a sample part?

Yes. Our product design team can measure and model a physical sample, propose improvements for moulding, and create the drawings needed to build the mould.

Do you handle assembly and testing, or only moulding?

Both. We run automated and manual assembly lines and an electrical testing lab, so OEMs can receive tested sub-assemblies instead of loose moulded parts.

How long does it take from drawing to first production?

For a typical engineering part, expect about 6 to 10 weeks: 1 week for DFM, 4 to 8 weeks for mould building and trials, then a pilot run. Complex multi-cavity tools take longer.

Will my design stay confidential?

We sign an NDA before receiving drawings for unreleased products, and moulds made for a customer are used only for that customer’s parts.

Start Your Project

Share your drawing and volumes, and our team will respond with a DFM note and a line-by-line quotation.

Request a quoteCall +91 89682 65400info@sark.in

Plants: Industrial Area Phase I, Chandigarh; EPIP Jharmajri, Baddi; Bhatolikalan, Baddi (H.P.). Open Monday to Saturday.

Related reading: plastic injection molding services · plastic manufacturing in India · how to choose a moulding partner